| Feed sensitive electronics with proper voltage regardless of battery condition. These stabilizing converters provide continuous, precisely regulated output over the entire range of a battery's usable voltage. This prevents subjecting loads to fluctuating input voltage which can cause shutdown, diminish performance and possibly damage sensitive circuitry. These converters provide total input/output isolation, virtually eliminating conducted line noise and permitting connection of negative ground loads to positive or floating ground systems, or vice versa. They can also be modified for use as battery chargers, allowing maintenance of a battery at a great distance from the charging source, providing reserve power if the main source fails. The rugged anodized aluminum case is ideal for mobile applications |
 |
Application benefits include:
• Operate electronics at optimal input voltage, even from nearly drained batteries
• Boost voltage to compensate for voltage drops in long wire runs from batteries
• Eliminate voltage drops during momentary high current drain from batteries, as during engine start
• Eliminate voltage fluctuation from charge sources
• Eliminate voltage overshoot due to sudden removal of high current load
Specifications
|
Model
|
Input
|
Output
|
Output Amps
|
|
|
Range
|
Voltage
|
Int.
|
Cont.
|
|
| 12-12-12I |
10-16 VDC
|
13.6 VDC
|
12
|
8
|
| 12-12-35I |
10-16 VDC
|
13.6 VDC
|
35
|
20
|
| 48-24-3I |
20-56 VDC
|
24.5 VDC
|
3
|
3
|
| 48-24-6I |
20-56 VDC
|
24.5 VDC
|
6
|
4
|
| 48-24-9I |
20-56 VDC
|
24.5 VDC
|
9
|
5
|
| 48-24-18I |
20-56 VDC
|
24.5 VDC
|
18
|
10
|
See Isolated Series Converters for complete specifications and mechanical description.
Options/Factory Modifications
• Operation as a battery charger (contact factory)
• Parallel/redundant operation (contact factory)
• Non-standard output voltage (contact factory)
|
|
|
|
Extreme vibration mounting kit
The Extreme Vibration Mounting Kit is available to protect NEWMAR power converters from the extreme stresses of shock and vibration when mounted on high–vibration vehicles. The kit (pictured here) replaces the standard vibration kit provided with the unit and fits into the unit's mounting flange to act as a "super shock absorber" for electronics in high-vibe applications. It is available to fit all NEWMAR units from 2 to 70 lbs. Specify KIT–L for units which weigh 2–15 lbs. and Kit–H for units which weigh 16-70 lbs. |
 |
|
|
|